Unlike a log flume or super flume, which generally seats up to eight passengers, a modern-day Shoot the Chute ride generally has larger boats seating at least four across.
Shoot the Chute is an amusement ride consisting of a flat-bottomed boat that slides down a ramp or inside a flume into a lagoon. Snake River Falls at Cedar Point, Sandusky, Ohio ( Learn how and when to remove this template message) ( February 2020) ( Learn how and when to remove this template message) Unreliable citations may be challenged or deleted. Please help this article by looking for better, more reliable sources.
The water level is constantly monitored by the control system which stop the ride in case of low level. The ride has a Block Zone anti-collision system in accordance with EN13814: Sensors around the water channel in well determined position detect and control the automatic run of the cars. Sensors detect and control the car’s access to the.Įlectrical panel complete of operational push button panel and power unit, will be complete of each safety component and its control will be determined by a PLC All electrical cables except the main supply cable will be object of the supply. Cars are lifted to the top with a rubber conveyor belt which is programmable via plc and has ac motors.
Lifts/Drops available in selection of heights up to Structure is hot dip galvanized. Rounding edges of the fiberglass specially designed for passenger’s safety. Special filter allows water to exit from car when I the lift but not to enter. On the sides car’s have wheels for slinging on the slope and anti-roll back system for the slide. Under the car there is a rubber mat of special quality and texture to made friction with the conveyor belts. Each car has 4 seats in row(two children and two adults) with stainless steel handles, front and back pad and special designed teethed fiberglass mat for maximise legs positions. Single cars made thick reinforced fiberglass of special design, specifically designed to float and flow inside the water channel and be supported during ascent and descent of the lift and during embarkation and disembarkation in the station on the conveyor belts to maximise stability and safe operation. They are hot dip galvanized and have a screw-register for levelling. Vertical frames support each water channel sections. Standard section turning radius 3m.Each standard section is 2.24 m long. Connections both with other channel’s sections, supports and vertical columns (depending on the track design) made a solid structure where water and cars flows inside depending from water speed Channel painting/decoration is option. Each section is made by hot dip galvanized steel flanged and bolted together with rubber pad to protect from water dripping.
0 kommentar(er)
